Advertisement

Featured Stories

375 Cubes Of Small-Block Ford Power

  •  - 0
  • World Products’ Man O’ War Ford Windsor-style 302/351 block from World Products is the foundation for World Class 375. - 1
  • The Man O’ War block is thicker and sturdier in key areas than Ford’s own blocks. The 375 has a “C” block, which has 351-style distributor mount, which permits the large-displacement “302” engine. Our C-block engine has an 8.200-inch deck height. - 2
  • All Man O’ War blocks have splayed four-bolt main caps. The main caps are billet steel and the fasteners for the inner bolts consist of studs and nuts. This makes the ubiquitous Windsor stud girdle unnecessary. - 3
  • The stroke for the big-inch “302” is derived from a 4.125-inch crank. It’s supplied from Eagle and is a 4340 steel forging. - 4
  • Next in the block is the camshaft. It’s a hydraulic cam, designed to give muscular sound while being completely streetable. World wouldn’t cough up the ramp specs. - 5
  • Behind the standard Ford aluminum front cover is a double-row chain. So far, this build is just like any other small-block Ford assembly. - 6
  • The Man O’ War block is designed to accept all standard Ford accessories, so this off-the-shelf front cover bolts right up as if the engine were one of Henry’s own. - 7
  • Mahle-supplied forged aluminum pistons (with coated skirts) deliver a 9.5:1 compression ratio. They’re pinned to Eagle 4340-forged H-beam rods. - 8
  • The high-volume oil pump assembly clears the reciprocating assembly of the “C” block works with the 351-style distributor mounting position. This provides the necessary clearance for the long stroke necessary to achieve 375 cubic inches. - 9
  • A Canton deep, dual-sump oil pan is standard and is designed for the typical Ford cross member; still, you’ll want to double-check before dropping into your Fox- or SN-95 Mustang. - 10
  • Our engine received a set of Windsor Jr iron cylinder heads, which have 180-cc intake ports. Aluminum heads with 200-cc runners also are available. - 11
  • Manley Severe Duty valves in the Windsor Sr. heads are 2.02 inches in on the exhaust side. They’re housed in 58-cc combustion chambers. - 12
  • Before the heads are dropped into place, a set of roller-tip lifters is installed. The block is machined for the roller and valvetrain of later-style 5.0 engines and the standard valley “spider” bolts right up, too. - 13
  • The iron heads require a little heavy lifting, but on they go. - 14
  • The induction combination consists of an Edelbrock single-plane intake manifold and a custom 870-cfm four-barrel carburetor. The carb is modified by World Products to fit this particular combination and isn’t an out-of-the-box part. - 15
  • A Mallory HEI-style distributor is standard, along with all the plugs and plug wires. The distributor is equipped with a plug-in for a complementing ignition box. - 16
  • Here’s the completed assembly, ready to head to the dyno. It’s a very complete package, including the plugs, wires, damper and other details. Like other World Products crate engines, it comes with a 2-year/24,000-mile warranty. - 17
  • The dynos were a little backed up when our test engine was ready, so we had to settle for watching a few other engines run. Our iron-head, 375-inch small-block is rated at 425 horsepower and 425 lb.-ft. of torque, which the later dyno runs matched – and then some! - 18
  • Print

provided by

Source

by Barry Kluczyk  More from Author

World Products’ Man O’ War-Based Crate Engine

For years, Ford enthusiasts have used clever means to build bigger-inch yet sturdy small-blocks. So-called “Clevors,” 347 strokers and other combinations are some of the ways Ford engine builders have tried to extract maximum horsepower from the small-block engine. And while builders have had good luck with creative displacement experiments, almost all involve compromises of one type or another.

Last year, however, World Products began producing its Man O’ War Windsor-type block casting and most of the old small-block compromises were made obsolete almost overnight. The Man O’ War looks and feels like the very Windsor engine it is based on, but is strategically bulked up inside to support dramatically increased displacement and power.

With guidance and suggestions from a prominent Ford NASCAR team, World Products improved the design of the Windsor small-block, adding about an inch of material to both the front and rear bulkheads. Iron also was added to the cylinder banks and decks to add strength and provide water passage room for large-displacement combinations.

The Man O’ War weighs about 60 pounds more than a standard Ford 302 block, but is considerably stronger throughout. The thicker block complemented with standard splayed four-bolt billet steel main caps, which should all but eliminate the tendency for catastrophic cracking that isn’t uncommon with the production blocks.

That’s all well and good, you’re thinking, but the question is how far you can stretch the Man O’ War. Farther than any blue oval fan is used to, that’s for sure. World offers crate engine combinations of 427 and 460 cubic inches. These mammoth small-blocks, not surprisingly, aren’t cheap. But at 500 and 575 horsepower, respectively, it’s hard to argue with their dyno numbers.

One of the more interesting combinations is the 375-cube engine, which promises more power and torque than, say, a comparable 347 stroker, but without compromises like a stud girdle. So, we visited World Products to learn more about what goes into the assembly.

The 375 is rated at a stout 455 horsepower and 425 lb.-ft. of torque. It usually takes a 302 and a centrifugal blower to make those kinds of numbers and this engine just sucks through a single four-barrel. Aluminum heads can be added for a few extra bucks and they add 30 horses and 20 lb.-ft. to the bottom line. Had the heads been in stock for our test session, we’d have ordered them up.

Getting started

 

World Products offers the Man O’ War in four deck heights, including 8.200 inches, 8.700 inches, 9.200 inches and 9.500 inches. The 8.200- and 8.700-inch decks are 302-style blocks, while the two taller decks are 351-style blocks. The minimum deck thickness is 0.600-inch.

A “C” version of the 302-style block is available with mounting positions for the oil pump and distributor in the same location as the 351 blocks. With standard Ford 302 blocks, interference with the oil pump keeps maximum displacement to about 347 cubes, but this unique combination permits a 375-cubic-inch “302” – and that’s just what we’ve got.

The World Class 375, and its “C” block, has an 8.200-inch deck height, with a 4.125-inch bore and 3.750-inch stroke. The crankshaft is a 4340-forged part, with sturdy forged H-beam rods and forged pistons comprising the reciprocating assembly. The bottom of each cylinder is notched to make room for the long-reach rods.

World wouldn’t give up the secrets of its custom-grind hydraulic camshaft, but tells us it is designed to maintain a streetable idle quality, but still deliver a noticeable lope as well as high-rpm performance. The block is topped with a pair of World’s own Windsor Jr iron cylinder heads, which boast 180-cc intake runners and 58-cc combustion chambers.

The tunnel-like intake path of the ports is considerably larger than comparable Ford heads, which have 124-cc runners. Consequently, the valves are matched to the heads’ tremendous flow, measuring 2.02 inches on the intake side and 1.600 inches on the exhaust. Not surprisingly, stiff, dual 125-pound valves springs complement the valvetrain, along with custom aluminum roller-tip rocker arms.

Feeding the heads’ big ports is 4150-type 870-cfm carburetor mounted atop an Edelbrock single-plane intake manifold. It’s a simple, but tested combination that provides excellent tractability across the rpm band; at least, that’s what we saw during testing on one of World’s in-house engine dynamometers.

The remainder of the engine’s components makes for a complete package, including a deep-sump Canton oil pan, SFI-approved balancer and even an HEI-type distributor from Mallory. Spark plugs and wires are installed, too. World’s crate engines come with a 2-year/24,000-mile warranty, which provides, we think, good peace of mind for a sizable investment.

Whether in an old Mustang or late-model racecar, getting big-inch power for your Pony just got a whole lot easier.

Source

World Products

51 Trade Zone Court

Ronkonkoma, NY 11779

(631) 981-1918

www.worldcastings.com

The Great Crate Engine Power and Price Ladder

 

World Products offers a dizzying number of Man O’ War crate engines, each separated in a specific hierarchy of power output and price. It’s a carefully crafted spread of offerings designed to appeal to every level of enthusiast desire and/or budget.

The five-step hierarchy includes Daily Driver, Cruiser, World Class, Hardcore and Limited Edition. Each comes with iron cylinder heads and, approximately 9:1 compression – all, that is, except the Limited Edition engines, which come with 10.5:1 pistons and aluminum heads. Aluminum heads are upgrade options on the other engines classes. Here’s how the classes stack up:

The “entry-level” Daily Driver engines feature stock displacement, a 750-cfm carb, mild hydraulic cam and, for example, output of 351 horsepower in the 351-cube version. It lists for $6,995.

Cruiser-class engines and above can feature increased displacement and correspondingly larger heads and carb. For the Man O’ War, there are 351-inch and 427-inch Cruiser engines, rated at 370 horsepower and 450 horsepower, respectively.

At the World Class level, like the 375-cube version in our story, larger Windsor Sr. heads are added, along with an 870-cfm carb. A 427-cube version is rated at 495 horses with the optional aluminum heads, while 351- and 375-inch versions also are available.

At the Hardcore level, the 427-cubic-inch engine swaps the hydraulic cam for a solid lifter type, bumps up compression to 9.5:1 and is topped with a 1050 Dominator carb. It’s rated at 500 horses with iron heads and 525 with aluminum lungs – the top-rung 525-horse version listing at $9,795.

The king of the hill Man O’ War crate engine is the 460-cube Limited Edition, which has a solid roller cam, 4.155-inch bores, a Dominator carb and a 10.5:1 compression ratio. For a list price of $10,995, it cranks out 575 horses and 550 lb.-ft. of torque.


AT A GLANCE: World Products World Class 375-CID Crate Engine

 

Engine type                                           OHV V-8; iron block with aluminum heads

Displacement                                        375 cu in

Compression ratio                                9.5:1

Horsepower                                         455 (advertised)

Torque (lb.-ft.)                                     445 (advertised)

Cylinder block                                      high-density cast iron

Main bearing caps                                four-bolt splayed; billet steel

Deck height                                          8.200 inches

Cylinder bore                                       4.125 inches

Stroke                                                  3.500 inches

Crankshaft                                            4340 forged steel

Connecting rods                                   4340 forged steel H-beam

Pistons                                                 forged aluminum with coated skirts

Camshaft                                              hydraulic

Cylinder heads                                      Windsor Jr iron; 180-cc intake runners

Combustion chamber                            58-cc

Valves                                                  2.02-inch intake; 1.600-inch exhaust (stainless steel)

Intake manifold                                     single plane

Carburetor                                           870 cfm (4150-type)

Distributor                                            HEI-type

Additional components                         deep-sump oil pan, spark plugs, plug wires, oil pan, polished valve covers, SFI balancer

COMMENTS

Find Articles

Please select a field.

To

 GO
 

Advertisement

 

Magazines

Magazines

Put your passion into gear

From Customs, Chevys, Fords to the Classics, these magazines provide the latest cutting edge information to fuel your passion.

MODEL INFORMATION

Required Information

 GO