Advertisement

Featured Stories

Bird Of Prey

  •  - 0
  •  - 1
  •  - 2
  •  - 3
  •  - 4
  •  - 5
  •  - 6
  •  - 7
  •  - 8
  •  - 9
  •  - 10
  •  - 11
  •  - 12
  •  - 13
  •  - 14
  •  - 15
  •  - 16
  •  - 17
  •  - 18
  •  - 19
  •  - 20
  •  - 21
  •  - 22
  •  - 23
  •  - 24
  •  - 25
  •  - 26
  •  - 27
  •  - 28
  •  - 29
  • Print

provided by

Source

by Steve Temple  More from Author

Transforming a ’70 Chevelle with a Twin-Turbo

As much as we appreciate classic muscle-car power, engine technology has come a long way in the last four decades. So instead of marching backward into the future, Tom Sparrow decided to give his ’70 Chevelle a new lease on life with a number of updates and other custom touches.

“If you had a way to build an old muscle car and make it new, that’s what we did,” Sparrow sums up. But there’s more to this modernized Chevelle than that, as he put his personal stamp on it: “When you look at the car, you look at me.”

As part owner of MSI Speedshop with Mark Stein, he’s used to working on Corvettes and early GM muscle cars. While searching for yet another personal project car (his eighth or ninth, by last count), he came across an ad for the Chevelle in the local paper. Looking past the scratches from the lawnmower sitting next to it, he decided to take it on. But this wouldn’t be a straight resto job. No, Sparrow’s big bird really needed to spread its wings with some 21st-century performance, handling and comforts, all while keeping that Seventies-style coat of feathers intact. The result is a silver-gray bird of prey with twin-turbo talons.

For instance, even though Sparrow started with a fairly basic ’98 5.7-liter LS1, he then fitted it with a pair of intercooled Garrett turbochargers. And the turbines are fed hot exhaust gasses from headers that he personally fabricated. He also had to resection the radiator core support, moving it forward to make room for turbos and intercooler.

A JDM wastegate with a 50mm Tial Blow-off valve from Edelbrock limits the pressure level to a healthy nine pounds. Given the forced induction, he kept the Comp cam to fairly mild specs (valve lift: Intake .558, Exhaust .563; advertised duration 265/271. Duration at .050 212/218 and lobe separation is 115.0). With the extra airflow, the factory computer required some custom fuel maps, finessed by GM tech expert Mark Romans. All told, the boosted block is good for 523hp at 5200 rpm and 533 lb/ft of torque, both measured at the rear wheels. “We’ve seen as much 560 hp, tops,” Sparrow notes, “but we want to keep this car streetable.”

To keep this high-pressure mill from blowing its top, two Spal fans cool the Ron Davis aluminum radiator. Dressing up the engine bay is a Zoops cover with carbon fiber overlay, along with a set of Vibrant hoses, Specter Works elbows, and XRP hoses and hose ends. As a finishing touch, the firewall was smoothed as well.

That flood of power flows through a T56 trans, beefed up by Sparrow with performance upgrades and a Centerforce Clutch, and then into a 12-bolt, built by Randy’s Ring & Pinion with a GM Posi. This driveline really spins those 19- inch Intro Billet aluminum rear rims—and we mean some serious tire smokin’ here, as the photos attest—nobody’ll ever ignore this Chevelle again!

Baer’s 13-inch disc brakes haul it down from freeway speeds, while a contemporary suspension setup keeps in carving the corners. The chassis claws through the curves with SPC Front Upper Control Arms, AFCO Tubular Lower Control Arms, and Moog Steering Components. At the rear are Edelbrock control arms and an ADDCO Anti Sway Bar, and Eibach Sport Springs support all four corners.

Smoothing the feathers of this screaming eagle are Dynacorn replacement body panels on the front fender and bumpers, and rear trunk lid. While the drip rails had been cut previously for cleaner bodylines, they hadn’t been properly welded up, important from a structural standpoint, since they act as a pinch-weld to secure the hardtop. So Sparrow, with some assembly help from Tim Tracy and Stephen Retter, rewelded the entire roof back to upper framework and A-pillars. They also shaved off the marker lights, giving this Chevelle a sleek, aerodynamic shape, ready for flight. “The hardest part of the build was definitely getting bodywork straight,” he admits.

The dove-gray color scheme came courtesy of SEM Titanium Metallic and Candy Apple Red Rally Stripes. Even the undercoating is color matched with

SEM bedliner paint, all thanks to helpful input from Chris Silvera of SEM products, and time in the paint booth donated by Jason Haskins.

The cabin comforts are equally plush, starting with a 2005 Pontiac GTO color-matched hide, perforated and sectioned into the seatbacks by Bob’s Upholstery. Marquez Designs’ custom-formed the door panels.

The Covan’s Classic Dash is a molded insert, graced with Autometer ProComp Gauges. Accenting the interior are a Zoops billet steering wheel and Longacre billet shifter. For a breath of cool, fresh air, there’s Vintage Air Gen IV HVAC system. And for those thumpin’ tunes, just crank up the Pioneer NAV/Audio/Video and speakers and Xtant subs, both powered by the MTX Amp.

Overall the car has been well received, even by the hardcore muscle-car contingent, probably because of the abundance of twin-turbo power, along with the careful attention to detail and finish work. All of which makes it truly a bird of a different feather…

SOURCE:
MSI Speedshop
812 Atlantic Street
Roseville, CA 95678
916/276-6335

COMMENTS

Find Articles

Please select a field.

To

 GO
 

Advertisement

 

Magazines

Magazines

Put your passion into gear

From Customs, Chevys, Fords to the Classics, these magazines provide the latest cutting edge information to fuel your passion.

MODEL INFORMATION

Required Information

 GO